HF9 - Cleaning and Maintenance

Parts identification

Use of the mainbody

Insert power cord plug into power socket, press the on/off button to turn on the machine.

Press the temperature button and speed button to adjust the air temperature and air speed:

Temperature button:

The air temperature is defaulted to be the sames as last use, you can press the temperature button to adjust the mode. There are 3 modes of high, medium and low :

High temperature:

Three air temperature indicators turn red

Medium temperature:

Two air temperature indicators turn red

Low temperature:

One air temperature indicator turns red

Speed button:

The air speed is defaulted to be the same as last use, you can press the speed button to adjust the mode. There are 3 modes of high, medium and low :

High speed:

Three air speed indicators turn red

Medium speed:

Two air speed indicators turn red

Low speed:

One air speed indicator turns red

Cold air/hot air switching

Long press the air temperature button for 3 seconds to switch to cold air mode the air temperature indicator will turn off. Under cold air mode, press temperature button to switch to hot air mode, default air temperature is the same as previous hot air mode.

Memory function

The working mode of the device defaults to be the same as last use. 

Use of accessories

Please install the accessories with the machine turned off, and do not load or unload the high temperature accessories during use to avoid burns.

Note

1. After use, allow the accessories to cool down and then load or unload them by holding the cover, knob or lever at the top of each accessory to avoid burns.

2. During use, please keep a distance of over 10cm between the air inlet and your hair to avoid your hair being drawn into the machine and keep a distance of over 3cm between the air outlet and your hair to avoid hair burns.

Fast dry nozzle

Fit the fast dry nozzle into the main machine, power up and it ready for fast hair drying.

Two-way curler

Assemble two-way curler to main machine. Twist top of the curler to switch to left or right curls. Turn on the machine, choose high temperature and high speed mode, take out a wisp of hair, hold the curler close to hair tip, and let hair follow the airflow to wrap around the curler. Keep high temperature curling for 10 seconds , and then long press temperature button for s 3 seconds to switch to cold air mode, keep cold air styling for 5-10 seconds.

Fluffy nozzle

Users can curl the roots of collapsed hair or bangs to create volume. Assemble the fluffy nozzle to main machine, powered on and heat the nozzle in high
temperature and high speed mode for 10 seconds. Then remove the nozzle and wrap the hair roots around the nozzle to create the desired volume. Keep for 5 to 10 minutes and then remove the fluffy nozzle from the hair.

Removal of accessories

After use, press the on/off button to turn off the machine, unplug the power cord and push down the release button to remove the accessories. (The picture is based on two-way curler.)

Note: Before cleaning, please remove the plug first. Please use the towel, cotton swab or toothbrush to clean air inlet and air outlet regularly, and rotate to remove the air inlet bottom cover to clean the metal filter. Do not press or rub the air inlet and air outlet with your fingernails or sharp objects to avoid damaging the product. Do not use alcohol, nail polish remover or detergent to clean the product as this may cause malfunction, breakage or discolouration.