EN 
UA
NO
RU
SV
DE
FR
TH
TR
DA
ES
PL
PT
LV
LT
ET
Chapter1 Product Assembly and Flushing
Parts Name
Packing List
Product Assembly
Charging base assembly
1. Take out all parts from package. There are totally 6 pcs 4 types of screws packaged together with base connector. Please use correct screw type as below instruction.
2. Insert metal tube and base cover connector into base cover. Make sure that the two parts cycled out are on the same side. Lock two type 1 screws.
3. Assemble metal tube assembly with base,lock one type 2 screw and two type 3 screws.
4. Assemble accessory holder with base and tube assembly, lock one type 4 screw.
Assemble electric floor head with metal tube
Hold the floor head with left hand, use right hand to insert the metal tube vertically into floor head, align with the conductive needle, press the tube until a “click” sound is heard.
Attention:
Keep the handle and floor head in the same direction, conductive needle shall align with the socket.
When packing, storing or cleaning, if the electric floor head needs to be removed, press the brush release button as shown in the picture and pull the electric floor head in the direction shown in the picture.
Assemble the battery pack and handheld vacuum cleaner
Assembly of battery pack: hold the hand-held vacuum cleaner in one hand, hold the battery pack in the other hand, aim at the guiding groove on the body, slide in the battery pack according to the arrow direction shown in the picture. Pull the battery pack after installation to make sure it does not get loose.
Attention:
When the vacuum cleaner is long idled, please remove the battery, pack the product and store it in a cool and dry place, avoid direct sunlight or humid environment.
Assemble metal tube and handheld vacuum
First, assemble floor head and metal tube according to the method of assembling electric floor head and metal tube. Assemble the floor head with metal tube assembly and handheld vacuum cleaner: as shown in the picture, align the conductive needle of the metal tube with the coupler of thesuction nozzle, push up until a “click” sound is heard.
Assemble and disassemble wet polishing head with the machine
1. Hold the wet polishing head and insert the metal tube into the connector of the wet polishing head in the direction shown in the
picture.
2. Then, align the conductive needle with the coupler and push metal tube until a “click”
sound is heard.
Assemble and disassemble the clean water tank of wet polishing head
1. Brush release button as shown in the picture and pull the electric floor head in the direction shown in the picture.
Assemble and disassemble the mop on the wet polishing head
1. Assemble and disassemble the mop on the wet polishing head.
2. Peal the mop off the wet polishing head, and you can reuse it after washing and drying.
Attention:
Mop or wet polishing head can be purchased at JIMMY distributor or customer service center.
How to fill water in the clean water tank
1. Flip up the water filling plug of the clean water tank.
2. Fill the clean water tank with clean water.
3. After the clean water tank is full, press the injection plug down firmly to secure it in place.
Attention:
To prevent damage to the clean water tank, do not fill it with any alcoholic or corrosive solution.
Note:
1. To ensure better use, leave the machine powered on even if it is long idled.
2. If the device hasn’t been used for more than 24 hours, it is recommended to drain 200 ℉ hot water for 5 seconds before using again.
3. When the device is turned on for the first time, At first purification process there will be large amount of bubbles discharged to raw water tank and raw water will become turbid. It is normal physical phenomenon and bubbles will disappear after standing for a few minutes. Device can be used normally.
Assembly of accessories
For the convenience of use, this product is specially equipped with some accessories for the hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner alone, you can directly connect the accessories according to your needs or connect the accessories through the stretch hose.
Connect electric mattress head,crevice tool, upholstery tool and soft brush to handheld vacuum as the picture.
Accessories Connection List
Chapter 2 Use of Vacuum
Charging
Attention:
When use the product for first time, battery power is not full. Need to charge the vacuum before using.
Charging of vacuum cleaner
When the vacuum cleaner power is insufficient, charge the vacuum cleaner in time ; When the voltage is too low, to protect the battery, vacuum cleaner will be automatic power-off, at this time the vacuum cleaner need to be charged. When charging, plug the charger connector into the A/C power socket, plug another end of charger into battery to start charging. When the handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum cleaner is charging. When charging is completed, LED display show 100% power.
If battery pack is charged separately without being assembled on machine, during charging, indicator in battery pack is red and turns green after charging is completed.
Attention:
1. When battery power is below ≤20%, if product is working in Max mode , it will change to Turbo mode automatically. When battery power runs off, product will turn off automatically.
2. If vacuum cleaner is long idled, charge the battery every three months to avoid battery failure.
After charging, please pull the charger plug off power socket and stop charging.
Attention:
If power cord is damaged, to avoid danger, it must be replaced by professional staff of the manufacturer, repairing agent or similar department.
Use of handheld vacuum and LED screen contents
Take the vacuum cleaner off the storage holder, press the on/off button to start or stop the vacuum cleaner. Mode button can adjust working mode. When machine is turned on, it works in Turbo mode, press the mode button to switch to the sequence of Turbo- Max - Eco mode.
During mode switch the mode will be displayed in LED screen.
Middle of LED screen displays product run time left in current mode. When mode is changed, left run time will also change accordingly.
When product works in Max mode and battery power drops below 20%, to extend product run time, product will automatically switch from Max to Turbo mode. After battery is charged to higher than 20% power, product can work in Max mode.
When the product is cleaning floor or carpet under Auto mode, it will adjust working power basing on the floor type it detects, in order to achieve higher cleaning efficiency. Under Auto mode, LED screen display Auto regardless how high the working power is.
Use of flexible metal tube
The flexible metal tube can be used for cleaning under the sofa, table, bed, and other furniture. Press the flexible metal tube release button to bend it.
2. After pressing the spray button, the water outlet indicator lights up, and the device begins spraying water to the wet polishing turntable. Pressing the mode button allows you to adjust water spray volume (Eco mode - less spray volume and Max mode for large spray volume).
3. Press the spray button again to stop water spray, and water spray indicator will turn off.
Attention:
1. you have to ensure that the outlet indicator is on so that the wet polishing head can spray water.
2. When the wet polishing head is mopping excessive sticky liquids on the floor, such as honey/Mayonnaise/ maple syrup/etc, the wet polishing head and vacuum cleaner will turn off automatically. This is a safety feature designed to protect the motor and gears.
3. The wet polishing head cannot absorb water.
4. The wet polishing head cannot be flushed with water.
Use of electric floor head
Electric floorhead is suitable to clean all types of floor and carpet.
Attention:
During the operation of the electric floor head, if there is a large volume of foreign matter inhaled or too much fiber wound, or even a child in the play of the machine mistakenly put his hand into the nozzle, resulting in the brushroll abnormal stop, the electric floor head will stop working, in order to protect personal safety and brush motor.
Use of accessories
Crevice tool: suitable for cleaning crevice, door or window corners and other narrow gaps.
Upholstery tool: suitable for cleaning closet, windowsill, sofa and table surface.
Electric mattress head: Suitable for sofa and bed mattress. The brushroll beats out and then cleans the dust mite and allergen from deep sofa or bed.
Soft brush: Suitable for cleaning furniture needs special care, like bookshelves, handicrafts, etc.
Chapter 3 Cleaning and Replacing Parts
Attention:
1. HEPA filter is available for sale from local vacuum cleaner distributors.
2. It is recommended to clean the dust cup after each use; When the dust cup is full or the HEPA filter is clogged, it needs to be cleaned and replaced if necessary.
3. Electric floor head brushroll might be entangled with hair after long time use. It needs to be cleaned in time to keep the vacuum working more efficiently.
Clean dust cup and filtration system
When dust cup is full or HEPA is clogged, LED screen will display HEPA icon as the picture to remind to clean dust cup and filter. Please clean dust cup and HEPA filer in time. Replace HEPA filter if necessary.
Steps of cleaning dust cup and filtration system:
1. Press dust cup bottom cover release button, open dust cup bottom cover, dump dust into trash can.
2. Lift up HEPA lid assembly from dust cup. Rotate HEPA filter clockwise and remove it from HEPA lid for washing. After washing, HEPA need to be completely dry before using it again.
3. Push dust cup release button located behind the dust cup and remove dust cup. Hold cyclone assembly handle and pull it out of dust cup. Disassemble cyclone top, secondary dust cup, adjustment ring and inner cyclone in sequence for cleaning. After washing, all parts need to be completely dry before using again. After cleaning, assemble the parts back in the opposite sequence of disassembly.
Clean brushroll
1. Move the brushroll release button along the arrow direction remove side cover.
2. Remove one end of the brushroll and take it out from nozzle for cleaning.
3. After cleaning or replacing brushroll, assemble it back in opposite sequence of disassembly
Storage of Vacuum Cleaner
When the vacuum is long idled, remove the battery, pack the product and store it in a cool and dry place, do not put in direct sunlight or
humid environment.
Battery pack disassembly
Press the battery release button, remove the battery pack in the arrow direction and place the battery in a plastic bag, then store it in a dry place.
