EN 
UA
NO
RU
SV
DE
FR
TH
TR
DA
ES
PL
PT
LV
LT
ET
Chapter1 Product assembly and disassembly
Noted: Cut off electricity before product assembly and disassembly.
Floorhead assembly and disassembly
To install the floorhead assembly, first align the bottom of the mainbody assembly with the head of the floorhead assembly, insert it down on the floorhead, and push it in until a “click” sound is heard; To take out the floorhead , place the machine on the ground, hold the floorhead with one hand and press floorhead release button with the other hand, lift the mainbody up, and remove the floorhead assembly.(Fig 1)
Metal tube assembly and disassembly
Insert the metal tube into the mainbody vertically until a“click”sound is heard. Make sure metal tube is firmly locked. To disassemble the metal tube, Remove battery pack and the use a hard tool like a screw driver to insert into the handle release hole and meanwhile pull out the metal tube upward.(Fig 2)
Assemble and disassemble battery pack
1. Slide battery pack along the slot and press the battery pack down firmly until a “click” sound is heard. The battery pack is locked.
2. Press the battery pack release button and pull the battery pack in the direction opposite to the assembly to unlock the battery pack. (Fig 3)
Note:
Except for the replacement of the battery pack, the battery pack doesn’t need to be taken out frequently.
Dirty water tank assembly and disassembly
To assemble dirty water tank, place dirty water tank bottom into mainbody, push dirty water tank towards mainbody until a “click” sound is heard. To take off dirty water tank, hold machine with one hand and hold dirty water tank with another hand, press dirty water tank release button to pull out dirty water tank. (Fig 4)
Charge base assembly
Press charging base upper, cleaning solution housing, and brushroll housing to the charging base lower along the illustrated position until a “click” sound is heard. (Fig 5)
Place machine to charging base
Make sure floorhead is in upright position, hold machine handle to lift the machine, aim charging slot on bottom of machine to the charging socket on charging base and put the machine into charging base. To use the machine, hold machine handle and lift out machine from charging base (Fig 6)
Clean water tank assembly and disassembly
To take off clean water tank, hold the clean water tank handle and pull out the clean water tank. To assemble clean water tank, put the clean water tank back to nozzle, align with the brushroll window. (Fig 7)
Brushroll assembly and disassembly
To remove the brushroll assembly, first remove the clean water tank assembly, then hold the floorhead down with one hand, rotate the brushroll end cap upwards with the other hand, and remove the brushroll outward;
When installing the brushroll assembly, first align the other end of the brushroll with the spline, rorate the brushroll to the end, and then push the brushroll inward, rotate the brushroll end cover down and install it in place, align brushroll cap with the floorhead top surface. (Fig 8)
Chapter 2 Use of the Product
Note: Before use, please check whether the machine has power, if no power, please fully charge the machine before using it.
LED screen and instructions
Operation of machine
Step on floorhead and push back the handle to release mainbody to tilt state, press the on/off button, default is in Auto mode, press the mode button to switch among floor mode, carpet mode and Auto mode, accompanied by English voice reminding. Press the on/off button again, the voice reminds "Machine turning off", the main motor will run for 2 seconds and then the machine stops working. (Fig 9)
Note
1. When cleaning carpet, please clean the floorhead first (refer to " Cleaning and Maintenance, Floorhead Cleaning" for details) and propose to change to carpet brush (Carpet brush can be purchased from JIMMY distributors).
2. Under carpet mode, keep pressing mode button for 5 seconds, product will work in maximum power and provide stronger cleaning performance.
3. When the battery power is lower than 20%, it cannot be switched to Carpet mode.
In Auto mode, the machine power changes automatically basing on how much dirty water or dust is detected. And LED light colour changes accordingly. The more dirty water or dust is detected, the more red lights. And the less dirty water or dust is detected, the more blue lights.
When upright vacuum cleaner is working, press the water spray button, the auto water spray function is open by default. LED screen will show auto spray indicator and clean water will be sprayed to brushroll automatically. (Fig 10-1). To turn off auto water spray function, keep pressing the self cleaning button for over 3 seconds when product is on. To turn on auto water spray function again, keep pressing the self cleaning button for over 3 seconds when product is on.(Fig 10-2)
If floor is very dirty, you can choose to spray more water to floor by using manual water spray function to improve floor washing effect. With the machine turned on, press manual water spray button, spray mouth sprays fan-shaped water; release the water spray button to stop spraying water. Manual water spray function can be activated no matter whether auto water spray function is turned on or off. (Fig 10-3)
Keep pressing self-cleaning button for 3s to turn on or turn off brushroll auto water spray function.
Note
1. The manual water spray button cannot be used with the on/off button or the mode button at the same time.
2. It is recommended to use carpet mode when there is heavy pollution or water stain.
3. When cleaning carpet, please turn off auto water spray function.
4. Please use the low-foam cleaning solution with this product for cleaning, do not put the easy foaming cleaning solution into the clean water tank for use, otherwise more foam will be generated during use, which may penetrate into the machine and cause danger.
Machine charging
Connect the power cord to the power supply, put the product into the charging base to start charging. The display screen will turn off when fully charged.(Fig 11)
Note
1. Before the first use, please fully charge the battery pack, and before the second charge, please empty the battery to ensure the life of the battery pack.
2. If the product is long idled , please charge the battery within every 3 months. (Be sure to use the power cord supplied with the product to charge)
3. When not charging, please unplug power cord from the socket to prevent the danger of accidental touching.
Hot drying function
Under charging mode, press mode button to enter hot dry mode. Hot air will dry entire air path including burshroll, dust cup and dirty water tank for about 0.5 hour and then only dry brushroll for another 2.5 hours. In the first 0.5 hour full air path drying, vacuum motor will work to send hot air through the full air path.
To stop drying air path and only keep brushroll drying for silent drying mode, press on/off button, vacuum motor will not work in this mode.(Fig 11)
To turn on and turn off hot air drying function, press mode button.
Brushroll & air path self-cleaning function
In charging mode, press the self-cleaning button to enter cleaning mode (Fig 11), and after completing selfcleaning, the machine enters the brushroll hot drying mode automatically; Self-cleaning process can be stopped in advance by pressing on/off button or mode button, and product will return to the charging mode. Fan will be turned off with a delay of 3mins.
Note
1. Self-cleaning mode is only to clean floorhead air path and hardfloor brushroll.
2. Before turning on the cleaning mode, please empty the dirty water in the dirty water tank, check that the machine is firmly placed on the charging base, the power cord is plugged into the power socket, the power cord is connected to the charging base, and the clean water tank retains at least 1/2 of the water; After completing the self-cleaning, clean the dirty water tank again;
3. When the battery is less than or equal to 10% power, the self-cleaning mode cannot be turned on, and it can be turned on normally after charging for a period of time。
Clean water tank empty indicator
1. When using the water spray function, if "" indicator appears in screen and the voice reports "No clean water, fill in water", please turn off the machine and add water to the clean water tank.
2. When using the self-cleaning mode, if it is detected that there is no water in the clean water tank, " " indicator appears in screen and the brushroll self cleaning will be stopped. The voice reports "No clean water, please fill water". To continue self cleaning, please add water to the clean water tank and empty the dirty water tank, then restart self clean mode.
Fill up clean water tank
Fill up clean water tank: Remove the clean water tank and lift the water filling plug of the clean water tank or directly open the water filling plug of the clean water tank, expose the water inlet hole, pour clean water and cleaning solution in,, and press the water filling plug down to install it to the end, and install it back into the clean water tank. (Fig 12)
Note
When adding clean water, you can add the equipped cleaning solution in the ratio of about one bottle cap to one full tank of clean water.
Dirty water tank full indicator
1. When the upright vacuum cleaner detects that the dirty water tank is full, " " indicator appears on screen, the machine will stop and give a voice reminder . Please clean the full dirty water tank and put it back.
2. When it is detected that the dirty water tank is full in self clean mode, ""indicator appears on screen, the machine will stop working and give a voice reminder. Please clean the full dirty water tank and put it back within 5 minutes and self cleaning will continue.
Dirty water tank cleaning
Take out dirty water tank upper cover and filter frame, dump the dirty water, assemble the dirty water tank after washing, and put it back on the floorhead (refer to "Cleaning of dirty water tank" for details).
Brushroll stuck indicator
When the cleaner is in working or cleaning mode, if the brushroll is stuck, the machine will stop and give a voice reminder. Please take out the brushroll, clean up the foreign matter or entangled hair on the brushroll.
Brushroll cleaning
After removing the clean water tank, pull out brushroll, use the cleaning brush to cut off and remove the hair winded around the brushroll , and clean the foreign matter attached to the brushroll and floorhead, Install brushroll and clean water tank back (refer to "Cleaning of Floorhead assembly" for details).
Air path blocked indicator
When the vacuum cleaner is working /self cleaning mode, if the air path is blocked, the machine will stop working and give a voice reminder. Please clean the possible blockage of the floorhead air path and dirty water tank, check and clean up in turn before continuing to work.
Air path cleaning
Disassemble the dirty water tank, take out dirty water tank upper cover and filter, wash all parts and them assemble back. Use pipe brush to clean the dirt, foreign objects and hair inside air path of floorhead. and then load the dirty water tank back into the floorhead assembly.
Voice function
The product includes voice reminding of 5 different language: English, German, Italian, French and Russian. Voice of the new machine is turned on and in English by default, press the voice button to switch to other language, keep pressing the voice button to turn off the voice function; press the voice button again to turn on the voice function. (Fig 13)
Low battery power indicator
1. When the upright cleaner is working, if the voice reminds " Low battery. Please charge the battery ", Please use it after charging.
2. When the upright cleaner is working, if the voice reminds " Low battery. Machine will be turned off soon. Please charge the battery ", the power is about to be exhausted, and it will automatically shut down. Need to charge for use.
3. When using vacuum cleaner, The LED screen displays left working minutes under current working mode. The icon on top right corner of the screen shows left battery power, full grid means 75% to 100% battery; 3/4 grid means to 50% to 75% battery; 1/2 grid means 25% to 50% battery; 1/4 grid means 1% to 25% of the battery; the blank means the battery being empty, and it needs to be charged before use.
Chapter 3 Cleaning and Maintenance
Dirty water tank cleaning
1. When dirty water tank is full, the dirty water tank full indicator on LED screen will blink.The machine will stop working immediately and has voice reminding “Dirty water tank full, please empty tank”.
2. After turning off the vacuum cleaner, remove the dirty water tank, lift the water tank top cover, and remove the foam filter frame from it, open the flip cover of the foam filter frame, take out the foam filter. Pour out dirty water and dirt in the water tank, then wash dirty water tank, water tank cover, foam filter frame and foam filter. (Fig 14)
3. If there is foreign matter in the dirty water tank pipe, it can be cleaned with the cleaning brush
4. Dry the above parts after washing. And then reassemble all the parts back into dirty water tank.
Note
1. When the machine is not in use, the upper cover of dirty water tank should be taken out for airing to avoid odor.
2. After the machine has finished working, it is recommended to clean the dirty water tank immediately to avoid odor.
3. After cleaning the upper cover of the dirty water tank, the metal contact sheet on the top cover of the dirty water tank must be wiped dry before use.
Floorhead cleaning
After removing the brushroll window, brushroll, clean water tank, and dirty water tank, insert the multifunctional cleaning brush through the circular hole below the installation position of the dirty water tank to clear foreign matter and scales in the pipe, and the clogged hair; Use the multi-functional cleaning brush to cut off the tangled hairs on the brushroll; Wipe the machine and the dirty parts removed with a rag, and then put it back on the machine separately (the brushroll can also be put into the brushroll box to dry); Rinse off the dirt attached to the multi-function cleaning brush and place it in the brushroll box.(Fig 15)
Note
Do not wash floorhead with water！
Maintenance and Storage
1. Please turn off the machine before the cleaning.
2. It is recommended to clean the dirty water tank, filter, brushroll and brushroll window after each use. The machine will stop working if the dirty water reaches MAX line. Please drain the dirty water tank immediately. After the accumulated use time of the filter reaches 30-50 hours (various basing on filter status), replace the filter to avoid affecting machine performance. Filter can be bought from local distributor.
3. When the machine is long idled, place it in a cool and dry place, avoid direct sunlight or wet environment.
4. When pack and store the machine, Please be sure to clean the machine and dry all parts to prevent damage to the machine.
