HW11 Pro-Cleaning and Maintenance

Floorhead assembly and disassembly

To install the floorhead assembly, first align the bottom of the mainbody assembly with the head of the floorhead assembly, insert it down on the floorhead, and push it in until a “click” sound is heard; To take out the floorhead, place the machine on the ground, hold the floorhead with one hand and press floorhead release button with the other hand, lift the mainbody up.(Fig 1)

Handle assembly and disassembly

Insert the end of the metal tube vertically to the port of the mainbody assembly until hearing a "click" sound, ensure that the metal tube is tight and not loose. To remove the metal tube, insert a hard tool such as a screwdriver into the metal tube release hole, and pull the metal tube upwards. (Fig 2)

Battery pack assembly and disassembly

1. Slide battery pack along the slot and press the battery pack down firmly until a “click” sound is heard. The battery pack is locked. (Fig 3)
2. Press the battery pack release button and pull the battery pack in the direction opposite to the assembly to unlock the battery pack Note: Except for the replacement of the battery pack, the battery pack doesn’t need to be taken out frequently

Handheld assembly and disassembly

Take the handheld vacuum cleaner installed with the battery pack, first insert the dust cup suction mouth into the groove of the mainbody cover, then press the handheld body to the installed metal tube, after hearing a "click", the handheld vacuum cleaner is successfully installed. and the product is used as an upright vacuum cleaner in this status. To remove the handheld vacuum separately, simply press and hold the handheld release button and lift handheld vacuum cleaner diagonally upwards. (Fig 4)

Charge base assembly

Press charging base upper, cleaning solution housing, and brushroll housing to the charging base lower along the illustrated position until a “click” sound is heard. (Fig 5)

Place machine to charging base

Make sure floorhead is in upright position, hold machine handle to lift the machine, aim charging slot on bottom of machine to the charging socket on charging base and put the machine into charging base. To use the machine, hold machine handle and lift out machine from charging base (Fig 6)

Dirty water tank assembly and disassembly

To assemble dirty water tank, place dirty water tank bottom into mainbody, push dirty water tank towards mainbody until a “click” sound is heard. To take off dirty water tank, hold machine with one hand and hold dirty water tank with another hand, press dirty water tank release button to pull out dirty water tank. (Fig 7)

Clean water tank disassembly and assembly

To take off clean water tank, hold the clean water tank handle and pull out the clean water tank. To assemble clean water tank, put the clean water tank back to nozzle, align with the brushroll window. (Fig 8)

Brushroll assembly and disassembly

To remove the brushroll assembly, remove the clean water tank assembly as detailed in (Fig 8), hold the floorhead down with one hand, rotate the brushroll end cap upwards with the other hand, and remove the brushroll outward; When installing the brushroll assembly, first align the other end of the brushroll with the spline, rorate the brushroll to the end, and then push the brushroll inward, rotate the brushroll end cover down and install it in place, align brushroll cap with the floorhead top surface. (Fig 9)

Use of upright vacuum cleaner

Press the handle on/off button, the display screen and decorative lights will light up, default is in Auto mode(Fig 10) , press the mode button to switch to Floor mode, press the mode button again to switch to Carpet mode (Fig 11) . Press the handle on/off button again to turn off the machine, the display screen and the decorative lights go out.
In Auto mode, the machine power changes automatically basing on how much dirty water or dust is detected. And LED light colour changes accordingly. The more dirty water or dust is detected, the more red lights. And the less dirty water or dust is detected, the more blue lights.

Note

1. When cleaning carpet, please clean the floorhead first (refer to " Cleaning and Maintenance, Floorhead Cleaning" for details) and to deep clean carpet it is recommended to replace the carpet brush. (Carpet brush can be selected according to your own needs and sold at JIMMY distributors)
2. When the battery level is lower than 20%, it cannot be switched to Carpet mode.

Water spray function

When upright vacuum cleaner is working, press the water spray button, the auto water spray function is open by default. LED screen will show auto spray indicator and clean water will be sprayed to brushroll automatically. (Fig 12-1). To turn off auto water spray function, keep pressing the self cleaning button for over 3 seconds when product is on. To turn on auto water spray function again, keep pressing the self cleaning button for over 3 seconds when product is on.(Fig 12-2)

If floor is very dirty, you can choose to spray more water to floor by using manual water spray function to improve floor washing effect. With the machine turned on, press manual water spray button, spray mouth sprays fanshaped water; release the water spray button to stop spraying water. Manual water spray function can be activated no matter whether auto water spray function is turned on or off. (Fig 13)

Use of handheld vacuum cleaner

Take off handheld cleaner, press the handheld on/off button, the display screen will light up, default is in Floor mode, press the handheld mode button to switch to Carpet mode. Press the handheld on/off button again to turn off the machine, the display screen go out.
The handheld vacuum cleaner can be assembled with accessories such as crevice tool, upholstery brush, electric mattress head for cleaning different areas (Fig 14-16)

Align accessory mouth with handheld vacuum air inlet and push upward until a “click” sound is heard. To remove the accessory, press the button on accessory and pull out the accessory. For more functions of connection between handheld vacuum cleaner and accessories please refer to accessories connection details.(Fig 17)

Note

1Only crevice tool, upholstery tool and electric mattress head are included in package. Other accessories like stretch hose, pet brush can be selected according to your own needs, and accessories are available at JIMMY distributors.
2. When the battery is lower than 20%, it cannot be switched to carpet mode;
3. When using handheld vacuum cleaner separately, do not vacuum water.

Voice function

The product includes voice reminding of 5 different language: English, German, Italian, French and Russian. Voice of the new machine is turned on and in English by default, press the voice button to switch to other language, keep pressing the voice button to turn off the voice function; press the voice button again to turn on the voice function. (Fig 18)

Note:
When using handheld vacuum cleaner, there is no voice function.

Brushroll hot air drying function

In the charging mode, press the handle mode button, product can enter the Brushroll hot drying mode, lasting 3 hours, during the drying process,every 3 minutes the brush rotates for 2s , the fan and PTC heater work during the whole process, and the product returns to charging mode after hot drying completed; Press the handle mode button again to turn off the Brushroll hot drying in advance. (Fig 19)
Note:
This mode is designed to prevent humid brushroll from breeding bacteria or odors.

Brushroll & air path self-cleaning function

In charging mode, press the self-cleaning button to enter cleaning mode (Figure 20), and after completing self-cleaning, the machine enters the brushroll hot drying mode automatically; Self-cleaning process can be stopped in advance by pressing on/off button or mode button, and product will return to the charging mode. Fan will be turned off with a delay of 3mins. (Fig 21)

Fill up clean water tank

Fill up clean water tank: Remove the clean water tank and lift the water filling plug of the clean water tank or directly open the water filling plug of the clean water tank, expose the water inlet hole, pour clean water and cleaning solution in,, and press the water filling plug down to install it to the end, and install it back into the clean water tank. (Fig 22)

Dust cup cleaning

Press the dust cup release button to remove the dust cup from the handheld vacuum cleaner; press the suction inlet release button to open the suction inlet and empty the dust cup; take out cyclone assembly and HEPA filter. Hold the metal mesh, rotate in the direction of the arrow to unlock the metal mesh, and then remove it downward. After cleaning, wiping and drying the parts, assemble all parts back into dust cup, and then installed dust cup back to handheld vacuum cleaner. (Fig 23)

Dirty water tank cleaning

After turning off the vacuum cleaner, remove the dirty water tank, lift the water tank top cover, and remove the foam filter frame from it, open the flip cover of the foam filter frame, take out the foam filter. Pour out dirty water and dirt in the water tank, then wash dirty water tank, water tank cover, foam filter frame and foam filter. If there is foreign matter in the dirty water tank pipe, it can be cleaned with the cleaning brush; dry the above parts after washing. Then reassemble all the parts back into dirty water tank, and then load the dirty water tank into the mainbody and continue to use.(Fig 24)

Note:
1. After using upright vacuum cleaner, it is recommended to clean the dirty tank immediately;
2. When reinstalling the filter,do not fold the black soft rubber under the filter。

Floorhead cleaning

After removing the brushroll window, brushroll, clean water tank, and dirty water tank, insert the multifunctional cleaning brush through the circular hole below the installation position of the dirty water tank to clear foreign matter and scales in the pipe, and the clogged hair; Use the multi-functional cleaning brush to cut off the tangled hairs on the brushroll; Wipe the machine and the dirty parts removed with a rag, and then put it back on the machine separately (the brushroll can also be put into the brushroll box to dry); Rinse off the dirt attached to the multi-function cleaning brush and place it in the brushroll box.(Fig 25)